Abs Alarm Indicator Lamp (For The Models Equipped With The Abs); Generator Alarm Indicator Lamp; Seat Belt Alarm Indicator Lamp - Chery QQ3 User Manual

the fluid level is low, refill the specified
brake fluid. 2. check whether the brake
works normally or not. 3. slowly drive
your vehicle to the M aintenance Center to
have it checked if the brakes work
normally. 4. drag your vehicle to the
Chery Authorized Service Station if the
alarm indicator lamp lights for a long
time and any brake works abnormally or
the brake fluid is found leakage.
The too low brake fluid level may
lengthen the braking distance, and also
increase the brake force and p edal travel.
ABS alarm indicator lamp (for
the models equipped with the
ABS)
The indicator lamp lights after turning on
the ignition switch, and, waiting for
approx. 4 s, then extinguishes.
If the indicator lamp doesn't light after
turning on the ignition switch, or the
lamp doesn't extinguish after it lights,
please cont act the nearest
Authorized Service Station.
If this indicator lamp lights when the
vehicle is traveling, it illustrates that the
ABS has trouble(s). Without the ABS
function, the vehicle's brake system still
works as usual. However, in this case,
you shall get to the nearest Chery
Authorized Service Station to have your
vehicle checked.

Generator alarm indicator lamp

This alarm ind icator lamp indicates that
the battery is discharging.
The indicator lamp lights when the
ignition switch is turned on,
extinguishes after the engine starts up.
Chery
If the indicator lamp lights when the
vehicle is traveling, you shall
● park your vehicle on the roadside;
● check whether the belt of generator is
slack or broken
● find out the trouble ASAP and remove
it if the belt is in good condition and the
charging system may be in trouble, and
immediately get to the nearest Chery
Authorized Service Station to have the
Instruments and control devices
charging system checked.
！CAUTION
The too loose generator belt may result
that the engine is overheat. It may
damage the engine. So, regularly check
the generator belt.

Seat belt alarm indicator lamp

In case that the ignition switch is placed
to the position "Ⅱ" , unless the driver has
put on the seat belt, the seat belt alarm
indicator lamp will light.
and
56