Warming-Up; Operation Of The Manual Transmission - Chery QQ3 User Manual

after waiting for 10 s.
If the engine fails to start up in the
continuous two times, step on the
accelerator pedal to its end and keep it in
the position, turn the key to the III
pos ition, and then loosen the key after the
startup of the engine, subsequently, with
the speedup of the engine, slowly release
the accelerator pedal.
4. For the vehicle equipped with the AMT
transmission, let the engine op erate at the
idle speed for several seconds after
startup, step on the foot brake, loosen the
hand brake, shift to the driving gear, and
then drive the vehicle.
5. For the vehicle equipped with the
manual transmission, let the engine
op erate at the idle speed for several
seconds after startup, step on the clutch,
shift to the driving gear, release the hand
brake, and then drive the vehicle.
! CAUTION:
Before the gear shifting, please pull up
the hand brake or step on the foot brake,
otherwise, when shifting the gear, the
vehicle may move to cause the damage or
injury.
6. The ambient temperature condition is
-25℃-40℃ for the normal startup and
operation of the engine (when the
ambient temperature is not within this
range, it may result in the difficulty to
start up the engine. This is a normal
case).

Warming-up

In cold weather, let the engine run in idle
for 30 min. after starting and then drive a
distance with middle speed.
！Notice
The exhaust system will be damaged
under high temperature. So the idle
Start and Operation
running can not exceed 5 min. If the
engine failed start, just step slowly down
the accelerate panel and maintain, then
start the engine.
Operation of the Manual
Transmission
Step down the clutch completely and
move the shift joystick, and loose the
clutch after shift.
！Notice
Do not shift in driving. When the car
stops completely, back-up shift can be
used to avoid any damage to the
transmission. Do not lay your foot on the
clutch panel to avoid any damage to the
clutch.
34