Before Starting The Engine; Start The Engine - Chery QQ3 User Manual

III position
Can start motor to drive the engine.
Loose the key after starting the engine,
the key will back to "II" position
automatically
！Notice
Do not place the key to "I" or "II"
position when the engine is not running
to avoid electric loss of the accumulator.
Do not pull off or turn the key in driving
to avoid the car out of control.

Before starting the engine


M ake sure there is no obstacles
around the car.

The maintenance projects in this
manual should be implemented
regularly, for example:
1、Check the position of the fuel;
2、Check whether the windows and lights
are clean
3、Watch the app earance of the tire and
check the air pressure
4、Adjust the position of the seat and
headrest.
5、Adjust the angle of the inner and outer
view mirror.
6、Tie the seat belt.
Turn the ignition switch to "II" position
to check the performance of the warning
lights.
Start and Operation
Neutral Pos ition

Start the engine

1. Turn the ignition switch to the III
position, DO NOT step on the accelerator
pedal, and immediately loosen the key
after the startup of the engine and then
the key returns to the II position.
2. If the temperature is above -12℃ and
the engine fails to start up within 5 s
when the engine starts up in the first time,
turn the key to the B position, and retry
after waiting for 10 s.
3. If the temperature is below -12℃ and
the engine fails to start up within 15 s
when the engine starts up in the first time,
turn the key to the B position, and retry
33