5.1.2. Remove four fix screws from the
combination
instrument
with
a
cross
screwdriver.
Torque: 2±0.3Nm
5.1.3. Disconnec to the combination instrument
harness connector, and then take off the
combination instrument.
5.2. Installation Step
The installing steps are reverse to those for
removal.
6.
Disassembly/Reassembly
of
Combination Switch, Wiper Switch,
Ignition Switch, Heliax Cable
Please refer to Disassembly/Reassembly of
Steering Column in the Service Manual of
Chassis.
64