Chapter 1 Engine Hood And Luggage Compartment; Removal Of Engine Hood; Preparation; Precautions - Chery QQ6 Service Manual

Chapter 1 Engine Hood and Luggage Compartment

I. Removal of Engine Hood

1. Preparation

Tool: flat head screwdriver, pliers, wrench

2. Precautions

2.1. During the removal, pay more attention to
the application of appropriate strength.
No rude operation.
2.2. During the removal/reassembly of trim,
especially pay more attention to the protection
of surface ornaments so that any ornament may
not be damaged.
3. Disassembly/Reassembly of engine
hood accessories

3.1. Removal Step

3.1.1. Remove the clip from the heat insulation
washers (19 pcs in total) with a flat head
screwdriver, and detach the heat shield from the
engine compartment.
3.1.2. Pull off the washing liquid hose.
3.1.3. Detach two water spray nozzle clips from
the bottom of engine hood, push the nozzle
from the bottom of engine hood, and take out
the nozzle from the outside.

3.2. Installation Step

The installing steps are reverse to those for
removal.
8