Config Fuser - Xerox DocuPrint N2025 System Administrator Manual

Using the Menu System
Table 1.11 Tray Menu Functions (continued)
Menu Item and Function
Tray N Mode
Determine whether or not to use
Tray N's auto size detection
mechanism or Custom Size
settings. The available values are:
Auto*
Custom

Config Fuser

Enable the setting of fuser
temperatures associated with
each paper type (otherwise set
automatically by the printer).
The available values are:
On
Off*
When set to On, paper types are
available as menu items (see the
following items in this table).
1-28 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu Down
until you see:
2. Press Item Up or Item Down until
you see:
3. Press Value Up or Value Down until
you see:
4. Press Enter. You will see:
5. Press On Line. You will see:
1. Press Menu Up or Menu Down
until you see:
2. Press Item Up or Item Down until
you see:
3. Press Value Up or Value Down until
you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Display Reads
Menu s
Tray Me nu
Tray Me nu
Tray N Mod e
Tray N Mod e
New Value
Tray Me nu
Tray N Mod e
Read y
Menus
Tray Menu
Tray Menu
Config Fuser
Config Fuser
New Value
Tray Menu
Config Fuser
Ready
Table 1.11 Page 5 of 10
=
=