Xerox DocuPrint N2025 System Administrator Manual page 173

1
2
3
2 After waiting for the fuser to cool down, open the rear
cover.
3 While facing the back of the printer, push the lever on the
left side of the fuser.
4 Hold the fuser tabs with both hands as shown and remove
the fuser as follows:
1 Lift up the left end.
2 Slide the fuser to the left.
Lift up the right end, then remove the fuser assembly
3
from the printer.
5 Remove the spacers from the new fuser.
Chapter 4: Maintaining the Printer
Maintenance Kit Instructions
4-11