Xerox DocuPrint N2025 System Administrator Manual page 116

Using the Menu System
Table 1.27 Novell Menu Functions (continued)
Menu Item and Function
NDS Tree
Set the NDS Tree character string
(from 1 to 64 characters in length).
The available characters are:
A - Z, 0 - 9, hyphen (-) and underscore (_)
The default is:
Null*
For this item (after Step 3), Item Up
moves the cursor to the right through
the displayed NDS Tree character
string and Item Down moves the
cursor to the left. This allows you to
change characters within the string
rather than having to reenter the
entire string.
With the cursor displayed under a
character, Value Up increments the
value of that character and Value
Down decrements the value.
1-100 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down.
You will see:
4. Press Value Up or Value Down
to change the value of the
character above the cursor. The
value is incremented or
decremented by 1 each time
the key is pressed. Holding
down Value Up or Value
Down causes continuous
scrolling through the values.
5. To change other characters in
the NDS Tree character string,
press Item Up or Item Down
to scroll right or left
respectively through the
character string, then press
Value Up or Value Down to
change the value of the
character above the cursor (as
in Step 4).
6. When you have completed
setting the NDS Tree, press
Enter. You will see:
7. Press Online. You will see:
Display
Menus
Novell Menu
Novell Menu
NDS Tree
NDS Tree
xxx...xxx
NDS Tree
xxx...xxx
NDS Tree
xxx...xxx
Novell Menu
NDS Tree
Ready
Table 1.27 Page 6 of 7
=
=
=