Xerox DocuPrint N2025 System Administrator Manual page 247

11 Close the rear cover.
12 Reconnect the printer's power cord and power on the
printer.
Check the Control Panel display. When the printer has
13
completed its power on diagnostics, the display should
show Ready. If an error message is displayed, remove and
reinstall the drive. If the problem persists, contact your
Customer Support Center.
If you have no other options to install, print a
14
Configuration Sheet (see page 1-102) and check it to
confirm that the option(s) have been properly installed.
Chapter 6: Installing Printer Options
Additional Memory
6-55