Xerox DocuPrint N2025 System Administrator Manual page 187

Table 5.1 Control Panel Messages (continued)
Message
Lift/Extend MBF
Remove All Paper
Load MBF
Size and Type
Load Tray 1
Size and Type
Load Tray 2
Size and Type
Load Tray 3
Size and Type
Low Paper–MBF
or
Low Paper–Tray n
Maintenance Kit
Replace
Manual Feed
Size and Type
Explanation/Corrective Action
Part of a sequence of messages following an initial paper jam message. A
paper jam has occurred while feeding from the multi bypass feeder. Lift up
and pull out the multi bypass feeder tray and remove all paper, then refer
back to the Control Panel for further messages.
Load paper of the size and type shown into the multi bypass feeder.
Load paper of the size and type shown into Tray 1.
Load paper of the size and type shown into Tray 2.
Load paper of the size and type shown into Tray 3.
The amount of paper in the MBF or indicated tray is low and will soon
need to be replenished.
The fuser count has reached 200,000 sheets (at end of life). The printer will
continue to print, but over time print quality will deteriorate. Replace the
maintenance kit and reset the maintenance counter as per the instructions
provided in the kit.
Load paper of the size and type shown into the multi bypass feeder.
Control Panel Messages
Table 5.1 Page 5 of 10
Chapter 5: Troubleshooting 5-9