Displaying Transmission Journals - Kyocera TASKalfa 650c Manual

Displaying Transmission Journals

Using COMMAND CENTER, you can display the transmission journals that this equipment sent by fax, Internet Fax
transmission, and E-mail.
Up to 100 logs are displayed in chronological order, with the most recent first. When the number of logs exceeds 100, logs
are deleted, beginning with the oldest one.
Accessing the Transmission Journal page in the [Logs] tab
1 Click the [Logs] tab and click the [Transmission] menu.
The Transmission Journal page is displayed.
Click the [REFRESH] icon at the upper right of the page to update the information.
2
To sort the transmission journals list so that a particular transmission journal is easier to find, click the
appropriate table heading. The page refreshes to display the information in the order you requested.
The Transmission Journal page displays the following information for each transmission journal.
 No.
Displays the serial number of the journals.
 File No.
Displays the file number to identify the transmission job.
 Date Time
Displays the date and time the transmission job was performed.
 Duration
Displays the time length taken for the transmissions. If it takes more than 1 hour, "59:59" is indicated.
 Pages
Displays the number of pages the transmission job contains.
 TO
Displays the destinations set for the transmission job.
 Dept
Displays the department code if the department management is enabled.
 Mode
Displays the transmission mode.
The transmission mode is displayed by a combination of a 2-digit alphabet code, a 3-digit numeric code, and up to a 4-
digit supplemental code.
For example: EC 604
2 digit alphabet code
(Communication Mode)
EC: ECM
G3: G3
 Status
Displays the result of the transmission.
 Line
Displays the line used.
1st numeric code 2nd numeric code
(bps) (Resolution)
0: 2400 0: 8x3.85
1: 4800 1: 8x7.7
2: 7200 2: 8x15.4
3: 9600 4: 16x15.4
4: 12000 8: 300 dpi
5: 14400 B: 600 dpi
6: V.34 D 150 dpi
4 DISPLAYING JOB LOGS
3rd numeric code Up to 4 digit
(Mode) supplemental code
0: MH P: Polling
1: MR SB: Mailbox
2: MMR SR/R: Relay mailbox
3: JBIG SF/F: Forward mailbox
ML: Internet Fax
I: N/W-Fax
O: Offramp Gateway

Displaying Transmission Journals

31