Kyocera TASKalfa 650c Manual page 120

7 COMMAND CENTER ADMINISTRATOR MODE
1
2
3
4
5
6
7
8
9
10
1) Enable DDNS
Select whether the dynamic DNS service is enabled or disabled.
2) Host Name
Enter the host name that will be added to the DNS server using DDNS.
3) Domain Name
Enter the domain name that will be added to the DNS server using DDNS.
When the [Obtain a Domain Name automatically] option is enabled in the TCP/IP settings, the domain name can
be obtained using the DHCP server.
 P.109 "Setting up TCP/IP"
4) Security Method
Enter the security method.
- GSS-TSIG
Select this to perform a secure DDNS session using GSS-TSIG. You must set a login name and a password. If both
are not set, the secure DDNS session will not be available.
- TSIG
Select this to perform a secure DDNS session using TSIG. To select this, you must upload a key file and a private
key file. If any of them is uploaded, the security setting will be disabled.
- SIG (0)
Select this to perform a secure DDNS session using SIG(0). To select this, you must upload a key file and a private
key file. If any of them is uploaded, the security setting will be disabled.
5) Primary Login Name
Enter the primary login name if the security method selected in the above setting is GSS-TSIG.
6) Primary Password
Enter the primary password if the security method selected in the above setting is GSS-TSIG.
7) Secondary Login Name
Enter the secondary login name if the security method selected in the above setting is GSS-TSIG.
8) Secondary Password
Enter the secondary password if the security method selected in the above setting is GSS-TSIG.
9) TSIG/SIG (0) Key file
Use this setting to upload or delete a key file to be used for TSIG and SIG (0). To upload it, click [Browse..] and specify
a key file to be uploaded, and then click [Upload]. To delete it, click [DELETE].
10) TSIG/SIG (0) Private Key file
Use this setting to upload or delete a private key file to be used for TSIG and SIG(0). To upload it, click [Browse..] and
specify a private key file to be uploaded, and then click [Upload]. To delete it, click [DELETE].
118 Setting up From COMMAND CENTER