Oven Pilot Check, Replacement - Vulcan-Hart EG160 Service Manual

OVEN PILOT CHECK, REPLACEMENT

OVEN PILOT CHECK
If all other systems have been checked and pilot will not stay lit, replacement of the pilot may be necessary.
OVEN PILOT REPLACEMENT
1 1 7
TOOLS REQUIRED: ⁄ " socket, socket driver, ⁄ " and ⁄ " open end wrenches.
4 2 16
1. Disconnect unit from main gas supply and allow unit to cool.
2. Remove oven bottom assembly (see Fig. 16).
3. Disconnect pilot from gas tubing (Fig. 41).
Fig. 41
4. Remove (2) #8 sheet metal screws holding pilot bracket in place.
5. Lift bracket away from oven burner.
6. Remove pilot from bracket.
7. Remove pilot by following Steps 1 through 5 in reverse order.
– 28 –