Previewing Images - Kyocera TASKalfa 250ci Operation Manual

FAX Operation (Basic)

Previewing Images

You can display a preview image of a scanned original on the panel to check the image to be sent.
Press Start key to start sending.
Press [Cancel] to change settings.
Sending Image
Zoom
Continuous
Scan
Original :
A4
Zoom : 100% i-FAX
Send : A4 Subject/Body
Cancel
Destination Quick Setup Original/Sending
Status
3-34
Destination
Centering Border Erase FAX Delayed
Transmission
Job Finish File Name E-mail
Notice Entry Subject/Body
FAX Direct FAX Send and
Transmission Polling RX Print
1/2
Color/ Advanced
Data Format Image Quality Setup
10/10/2008
1
Prepare to send the image as described in steps 1
to 6 in Automatic Send on page 3-4.
2
Press [Preview] on the left side of the [Quick
Setup], [Type of Original/Transmission], [Color/
Image Quality] or [Advanced Setup] screen.
The machine scans the original and displays a
1
preview image.
NOTE:
If the transmission functions below are
modified, the results are applied in the preview
image. For more information on the transmission
functions, refer to Automatic Send on page 3-4 or
FAX Operation (Advanced) on page 4-1.
• Scan Resolution
• Scan Density
10:10
• Original Size
Selection
• Sending Size
Selection
If you have placed a multiple-page original in the
optional document processor, the machine scans
all the originals but only the first page is previewed.
You cannot change the transmission functions
while the preview image is displayed.
3
Press the Start key to send the fax. Transmission
begins.
To change any of the transmission functions, press
the Stop key or press [Cancel]. The preview image
disappears and the destination is cancelled. To see
the preview again, make the transmission function
changes and select the destination.
• Zoom
• Original Orientation
• Selection of Image
Quality
• Border Erase
• Color Selection
OPERATION GUIDE