Kyocera TASKalfa 250ci Operation Manual page 116

FAX Operation (Advanced)
Communication modes subject to job accounting
• Normal transmission
• Delayed transmission
• Broadcast transmission
• Sub address transmission
• Encrypted transmission
• Manual send when dialed from this machine to the receiving system
• Polling reception
• Network FAX transmission
• Transmission from the document box
Restriction of use function
When you have enabled job accounting, you need to enter an Account ID when performing the following
operations.
• Normal transmission
• Delayed transmission
• Broadcast transmission
• Sub address transmission
• Output from FAX Box
• Encrypted transmission
• Manual send when dialed from this machine to the receiving system
• Polling transmission
• Network FAX transmission
• Transmission from the document box
IMPORTANT: You can use 'Make a call', 'Checking FAX Job History' and 'Communication Control Report
Output' functions without entering an Account ID or Administrator No.
When job accounting has been enabled, batch transmission function works only for communication to be
performed for the same Account ID. The communication to be performed with a different Account ID is not
conducted as a batch transmission.
Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However, when job
accounting has been enabled, and you send originals after entering an Account ID, the Account Name is printed.
4-52 OPERATION GUIDE