Kyocera TASKalfa 250ci Operation Manual page 161

Ready to send.
FAX No. Entry
Pause Space
Add a new FAX destination.
Enter FAX number with the numeric keys.
Add to Addr Book Next Dest.
Status
Ready to send.
FAX No. Entry - Encrypted Transmission
Off
Encryption Key No.
On
Key 01
Key 02
Key 03
Key 04
Key 05
Status
FAX No. Entry - Encryption Box
Off Enter box number using numeric keys.
On
Box No.
0002
Status
OPERATION GUIDE
Destination
0
Sub Address
Transmission
Backspace
Start Speed
ECM
Encrypted
Transmission
On Hook
Cancel OK
10/10/2008 10:10
1/1
Off
Encryption
Box
Cancel OK
10/10/2008 10:10
Cancel OK
2008/10/10 10:10
4
Press [FAX No. Entry].
5
Use the numeric keys to enter fax number of the
other party, and press [Encrypted Transmission].
NOTE:
When encrypted transmission has been set to
a destination in the Address Book or One-touch keys,
you can use the destination.
6
Press [On] and select the encryption key number.
7
Press [OK] and go to step 10. When the selection
of an encryption box is required by the other party,
press [Encryption Box] and go to the next step.
NOTE:
When the machine receives originals, the
encryption box is not used.
8
Press [On] and use the numeric keys to enter the
encryption box number (4 digits), and press [OK].
9
Press [OK].
10
Press [OK].
11
Press the Start key. The transmission will start.
Setup and Registration
6-27
6