Previewing Images - Kyocera TASKalfa 2550ci Operation Manual

Previewing Images

You can display a preview image of a scanned original on the panel to check the image to be sent.
Sending Image
Zoom
Continuous
Scan
Original : A4
FAX
Zoom : 100%
Polling RX
Send : A4
Preview Preview
Destination Quick Setup Org./Sending
Data Format
Status
Preview: 2007040410574501
Status
Destination
Centering Border Erase FAX Delayed
Transmission
Job Finish File Name FAX Direct
Notice Entry Transmission
Send and Send and
Print Store
Image Quality Advanced Program
Setup
12/12/2011 10:10
No.
Size : A4
Resol. : 200x100dpi
1/6
Close
12/12/2011 10:10
1
Prepare to send the image as described in
Automatic Send on page 3-4.
2
Press [Preview] on the left side of the [Quick
Setup], [Type of Original/Transmission], [Image
Quality] or [Advanced Setup] screen.
The machine scans the original and displays a
preview image.
Press [Detail] to display a preview image. To
enlarge the image, press [
[ ]. [ ], [ ], [
enlarged image to move the part that is displayed.
NOTE:
If the transmission functions below are
modified, the results are applied in the preview
image. For more information on the transmission
functions, refer to Automatic Send on page 3-4 or
FAX Operation (Advanced) on page 4-1.
• Scan Resolution
• Scan Density
• Original Size
Selection
• Sending Size
Selection
If you have placed a multiple-page original in the
document processor, the machine scans all the
originals but only the first page is previewed. [Detail]
can be pressed to view all preview images. Press
[ ] to move through the preview images in the order
they were scanned.
You cannot change the transmission functions while
the preview image is displayed.
To change any of the transmission functions, press
the Stop key or press [Cancel]. The preview image
disappears and the destination is cancelled. To see
the preview again, make the transmission function
changes and select the destination.
3
Press the Start key to send the fax. Transmission
begins.
3-24
FAX Operation (Basic)
]. To reduce, press
], or [ ] can be pressed in the
• Zoom
• Original Orientation
• Selection of Image
Quality
• Border Erase