Kyocera TASKalfa 250ci Operation Manual page 213

Error Code
U01700 - U01720
U01721
U01800 - U01820
U01821
U03000
U03200
U03300
U03400
OPERATION GUIDE
Possible Cause/Action
Communication error occurred during high-speed
transmission. Send again.
Communication error occurred during high-speed
transmission. Designated transmission speed
may not be available for the recipient machine.
Reduce the transmission start speed and send
again.
Communication error occurred during reception of
high-speed transmission. Ask the sender to
reduce the transmission speed and send again.
Communication error occurred during reception of
high-speed transmission. Designated
transmission speed may not be available for this
machine. Ask the sender to reduce the
transmission speed and send again.
During polling reception, a fax could not be
received because no originals were set in the
other party's fax machine. Check with the other
party.
Sub address bulletin board reception was
attempted and the other party's machine is an our-
brand model, but the specified sub address box
contained no data. Check with the other party.
An error occurred due to either 1 or 2 below.
Check with the other party.
1
The other party's machine is an our-brand
model and transmission restrictions were
found set by the other party during polling
reception. Communication was interrupted
because the password was incorrect.
2
The other party's machine is an our-brand
model and transmission restrictions were
found set by the other party during sub
address bulletin board reception.
Communication was interrupted because the
password was incorrect.
Polling reception was interrupted because the
password entered by the other party did not match
the Local FAX ID on the receiving machine. Check
with the other party.
Appendix-17