Kyocera TASKalfa 250ci Operation Manual page 78

FAX Operation (Advanced)
Status
Scanner
Ready.
Printer
Ready.
Removable Memory
Not connected.
Format Remove
FAX Port 1
Dialing...
Line Off Manual RX
FAX Log
Printing Jobs Sending Jobs
Status
4-14
Hard Disk
Overwriting...
Display
Error
FAX Port 2
Receiving...
Line Off
i-FAX Check New FAX
Storing Jobs Device/
Paper/Supplies
Communication
10/10/2008
2 Press [Device/Communication], and then
[Manual RX]. Reception will start.
NOTE:
When using a telephone set that can send
tone signals, use the telephone to start the
reception of originals with the remote switch
function. (Refer to Remote Switch Function on
page 4-15.)
When you hear a voice from the receiving
10:10
system
The telephone line has connected to the telephone
of the sending system. When the conversation is
over, follow steps 1 to 2 above.
After the sending system has started transmission,
the machine starts receiving originals.
4
When reception starts (when the Receive indicator
on the operation panel starts blinking), return the
handset to its original position.
OPERATION GUIDE