HP SN3000B Administrator's Manual page 530

24
LSAN zone configuration
•
•
•
•
•
Configuring an Enforce LSAN tag
1. Log in to the FC router as admin.
2. Enter the following command to disable the FC router:
3. Enter the following command to create an Enforce LSAN tag:
4. Enter the following command to enable the FC router:
5. Change the names of the LSAN zones in the edge fabrics to incorporate the tag in the names.
Example
Configuring a Speed LSAN tag
1. Log in to the FC router as admin.
2. Enter the following command to create a Speed LSAN tag:
3. Change the names of the LSAN zones in the edge fabrics to incorporate the tag in the names.
4. Toggle the host or target port to trigger the fast import process.
Example
492
The LSAN tags are configured per FC router, not per fabric. If the backbone fabric has multiple
FC routers, it is recommended that you configure the LSAN tags on all of the FC routers.
The FC router must be disabled before you configure the Enforce tag. Configuring the Speed
tag does not require that the FC router be disabled; however, after configuring the Speed tag,
you must toggle the host or target port to trigger the fast import process.
The tag is from 1 through 8 alphanumeric characters.
You can configure only one Speed tag on an FC router, and up to eight Enforce tags on an FC
router. The maximum number of tags (Enforce and Speed) on an FC router is eight.
Up to 500 Speed LSAN tags are supported.
switchdisable
fcrlsan --add -enforce tagname
The tagname variable is the name of the LSAN tag you want to create.
switchenable
sw0:admin> switchdisable
sw0:admin> fcrlsan --add -enforce enftag1
LSAN tag set successfully
sw0:admin> switchenable
fcrlsan --add -speed tagname
The tagname variable is the name of the LSAN tag you want to create.
sw0:admin> fcrlsan --add -speed fasttag2
LSAN tag set successfully
Fabric OS Administrator's Guide
53-1002446-01