The Browser - HP SN3000B Administrator's Manual

Obtaining certificates
Check the instructions on the CA website; then, perform this procedure for each switch.
1. Generate and store the CSR as described in
2. Open a Web browser window on the management workstation and go to the CA website. Follow
3. Through a Telnet window, connect to the switch and log in using an account with admin
4. Enter the secCertUtil showcsr command. The contents of the CSR are displayed.
5. Locate the section that begins with "BEGIN CERTIFICATE REQUEST" and ends with "END
6. Copy and paste this section (including the BEGIN and END lines) into the area provided in the
It may take several days to receive the certificates. If the certificates arrive by e-mail, save them to
an FTP server. If the CA provides access to the certificates on an FTP server, make note of the path
name and make sure you have a login name and password on the server.
Installing a switch certificate
Perform this procedure on each switch.
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the secCertUtil import command.
3. Select a protocol, enter the IP address of the host on which the switch certificate is saved, and
Example of installing a switch certificate
Once the certificate is loaded on the switch, HTTPS starts automatically.

The browser

The root certificate may already be installed on your browser, if not, you must install it. To see
whether it is already installed, check the certificate store on your browser.
The next procedures are guides for installing root certificates to Internet Explorer and Mozilla
Firefox browsers. For more detailed instructions, refer to the documentation that came with the
certificate.
Fabric OS Administrator's Guide
53-1002446-01
the instructions to request a certificate. Locate the area in the request form into which you are
to paste the CSR.
permissions.
CERTIFICATE REQUEST".
request form; then, follow the instructions to complete and send the request.
enter your login name and password.
switch:admin> seccertutil import -config swcert -enable https
Select protocol [ftp or scp]: ftp
Enter IP address: 192.10.11.12
Enter remote directory: path_to_remote_directory
Enter certificate name (must have ".crt", ".cer", \
or ".pem" suffix): 192.1.2.3.crt
Enter Login Name: your_account
Enter Password: *****
Success: imported certificate [192.1.2.3.crt].
Secure Sockets Layer protocol
"Generating and storing a CSR"
6
on page 122.
123