Cli Commands In An Ad Context; Executing A Command In A Different Ad Context; Displaying An Admin Domain Configuration; Table 62 Ports And Devices In Cli Output - HP SN3000B Administrator's Manual

CLI commands in an AD context

The CLI command input arguments are validated against the AD member list; they do not work with
input arguments that specify resources that are not members of the current Admin Domain. All
commands present filtered output, showing only the members of the current Admin Domain.
For example, switchShow displays details for the list of AD members present in that switch. Note
the following about the switchShow output:
•
•
A port or device appears in CLI command output or other management tool outputs if any one of
the conditions listed in
TABLE 62
For
domain,index
Device WWN
RASlog and syslog output is not filtered based on AD membership.
Refer to the Fabric OS Command Reference for more detailed information about command syntax
and usage and to understand how existing commands behave in an AD context.

Executing a command in a different AD context

You can execute a command in an Admin Domain that is different from your current AD context.
The Admin Domain must be one that you can access. This option creates a new shell with the
current User_ID, switches to the specified Admin Domain, performs the specified command, and
exits the shell.
1. Connect to the switch and log in.
2. Enter the ad
Example of executing the switchShow command in the AD7 context

Displaying an Admin Domain configuration

You can display the membership information and zone database information of a specified Admin
Domain. Note the following differences in the information displayed based on the Admin Domain:
•
Fabric OS Administrator's Guide
53-1002446-01
Because all E_Ports and EX_Ports are shared across all Admin Domains, they are shown under
all Admin Domains.
Other ports are displayed without any attribute details (with an explanation that they are not
part of the current Admin Domain).
Table 62
Ports and devices in CLI output
Condition
•
The port is specified in the domain,index member list of the Admin Domain.
•
One or more WWNs specified in the AD member list is attached to the domain,index.
•
The device WWN is specified in the AD WWN member list.
•
The device WWN is attached to one of the domain,index members specified in the AD
member list.
exec command, specifying the Admin Domain and the command you want to
--
execute.
ad --exec ad_id "command"
switch:AD255:admin> ad --exec 7 "switchshow"
AD255: If you do not specify the AD name or number, all information about all existing Admin
Domains is displayed.
SAN management with Admin Domains
is met.
17
359