Enabling The 10-Gbe Ports On An Fx8-24 Blade - HP SN3000B Administrator's Manual

18
10G licensing

Enabling the 10-GbE ports on an FX8-24 blade

To enable the 10-GbE ports on an FX8-24 blade, follow these steps.
1. Connect to the Brocade Backbone and log in using an account with admin permissions, or an
2. Use the licenseAdd command to add the 10G license.
3. Use the licenseShow command to check the results of automatic license assignment. If the
4. Use the licenseShow command to verify the license.
5. Use the bladeCfgGeMode
Example of assigning a 10G license on an FX8-24 extension blade and enabling both 10-GbE ports
This example assigns a license to slot 7 on a DCX 8510-4 Backbone and enables both 10-GbE
ports on the FX8-24 blade in that slot. In this example, the license was first automatically assigned
to slot 1.
380
account with OM permissions for the license class of RBAC commands.
results are not what you intended, use the licenseSlotCfg command to reassign the license to
the desired FX8-24 blades.
FX8-24 blade. To enable the 10-GbE ports, set the mode parameter to one of the following:
•
10g—Enables both 10-GbE ports, disables all ten 1-GbE ports.
•
dual—Enables the xge0 port (but not xge1) and also enables all ten 1-GbE ports.
8510-4switch:admin> licenseadd aTFPNFXGLmABANMGtT4LfSBJSDLWTYD3EFrr4WGAEMBA
8510-4switch:admin> licenseshow
aTFPNFXGLmABANMGtT4LfSBJSDLWTYD3EFrr4WGAEMBA
10 Gigabit FCIP/Fibre Channel (FTR_10G) license
Capacity 1
Consumed 1
Configured Blade Slots 1
8510-4switch:admin> licenseslotcfg -remove FTR_10G 1
8510-4switch:admin> licenseslotcfg -add FTR_10G 7
8510-4switch:admin> licenseshow
aTFPNFXGLmABANMGtT4LfSBJSDLWTYD3EFrr4WGAEMBA
10 Gigabit FCIP/Fibre Channel (FTR_10G) license
Capacity 1
Consumed 1
Configured Blade Slots 7
8510-4switch:admin> bladecfggemode --set 10G -slot 7
8510-4switch:admin> switchshow -slot 7
...
158 7 30 019e00
159 7 31 019f00
7 ge0
7 ge1
7 ge2
7 ge3
7 ge4
7 ge5
7 ge6
7 ge7
7 ge8
7 ge9
7 xge0
7 xge1
set mode command to configure the GbE port mode for the
--
-- -- Offline
-- -- Offline
-- 1G No_Module FCIP
-- 1G No_Module FCIP
-- 1G No_Module FCIP
-- 1G No_Module FCIP
-- 1G No_Module FCIP
-- 1G No_Module FCIP
-- 1G No_Module FCIP
-- 1G No_Module FCIP
-- 1G No_Module FCIP
-- 1G No_Module FCIP
-- 10G No_Module FCIP
-- 10G No_Module FCIP
VE
VE
Disabled (10G Mode)
Disabled (10G Mode)
Disabled (10G Mode)
Disabled (10G Mode)
Disabled (10G Mode)
Disabled (10G Mode)
Disabled (10G Mode)
Disabled (10G Mode)
Disabled (10G Mode)
Disabled (10G Mode)
Fabric OS Administrator's Guide
53-1002446-01