Configuration File Format - HP SN3000B Administrator's Manual

8
Configuration settings
If your user account has chassis account permissions, you can use any of the following options
when uploading or downloading a configuration file:
-fid
-all
-chassis

Configuration file format

The configuration file is divided into three areas: the header, the chassis section, and one or more
switch sections.
Following is an example of a configuration file with two switch sections.
178
To upload the specified FID configuration.
To upload all of the system configuration, including the chassis section
and all switch sections for all logical switches.
Note: Use this parameter when obtaining a complete capture of the switch
configuration in a switch that has Virtual Fabric mode disabled.
To upload only the chassis section of the system configuration file.
[Configuration upload Information]
Configuration Format = 3.0
Minimum Compatible Format = 3.0
Excluding Format = 0.0
date = Tue Mar 1 15:53:18 2011
FOS version = v7.0.0.0
Number of LS = 2
[Chassis Configuration Begin]
[fcRouting]
[Chassis Configuration]
[LicensesDB]
[Bottleneck Configuration]
[DMM_WWN]
[Licenses]
[Chassis Configuration End]
date = Tue Mar 1 21:28:52 2011
[Switch Configuration Begin : 0]
SwitchName = Sprint5100
Fabric ID = 128
[Boot Parameters]
[Configuration]
[Bottleneck Configuration]
[Zoning]
[Defined Security policies]
Fabric OS Administrator's Guide
53-1002446-01