Assign Port Panel; Sort Logical Paths In Path Set Panel - HP StorageWorks P9000 Reference Manual

Table 49 Contents of the Edit Port Definition Panel (continued)
Item
Secondary
AC
Port
In the initial state, the information is displayed in ascending order by hexadecimal code in the
following order: Primary and then Secondary for Port.

Assign Port Panel

When you press F5=Add in the Edit Port Definition panel, the Assign Port panel is displayed for
assigning new physical paths.
Figure 58 (page 68)
Figure 58 Assign Port Panel
Table 50 (page 68)
Table 50 Contents of the Assign Port Panel
Item
Primary Port Number
Secondary Port Number

Sort Logical Paths in Path Set Panel

When F6=Sort is pressed in the Path Set Detail panel, the Sort Logical Paths in the Path Set panel
is displayed.
Figure 59 (page 69)
68 ISPF Panels
Description
S/N Secondary storage system serial number
Model Model of the secondary storage system
IFType Secondary interface version
PathID Secondary path ID
CU Secondary CU number
SSID Secondary SSID
Specify an action.
d— Deletes a physical path.
When actions are entered in multiple AC columns, each is processed in the
order displayed.
Primary Port number of the physical path of the primary site
Dir Direction of the path
Secondary Port number of the physical path of the secondary site
shows the Assign Port panel.
describes the items in the Assign Port panel.
Description
Port number of the primary site
Port number of the secondary site
shows the Sort Logical Paths in the Path Set panel.