Manage Path Set Panel (Logical Path Management) - HP StorageWorks P9000 Reference Manual

Table 69 Contents of the Command Device Selection List Panel (continued)
Item
CCA
Devn
1 If the specified action has been aborted, the execution result (RC) is not displayed correctly.
When the route list definition has been modified or deleted, sometimes the command devices
defined in the old route list remain registered in the storage system. Such command devices can
be accessed directly through this panel.
NOTE: Only devices registered in the disk configuration definition file are displayed. Scan the
target storage system to detect command devices and register them in the disk configuration
definition file in advance.

Manage Path Set Panel (Logical Path Management)

When 5 Manage Path Set is selected in the Main Menu panel, the Manage Path Set panel to
operate path sets is displayed.
Figure 94 (page 109)
Figure 94 Manage Path Set Panel
Table 70 (page 110)
Description
CCA of the detected command device (2-digit hexadecimal number)
Device number of the detected command device (2-digit hexadecimal
number)
shows the Manage Path Set panel.
describes the items in the Manage Path Set panel.
Manage Path Set Panel (Logical Path Management) 109