NOTE:
You must specify either the supervisor DKC or the arbitration command device on the first line.
They cannot both be specified on the same line.
Make sure that only one copy direction (forward direction only, reverse direction only, or
forward and reverse directions) is used in the file.
Examples of CSV Files
CSV Files Used by the YKIMPORT Command
This example presents the pair information CSV file and EXCTG information CSV file that are
required for defining the copy group configuration shown in
appropriately. The first line is a header (comment).
Figure 151 Example of a 4x4 Configuration Defined by the YKIMPORT Command
Pair information CSV file
//*PDEVN,PSN
F101 ,
F201 ,
EXCTG information CSV file
//*PSN
14002,14001,01
64051,64050,03
CSV Files Used by the YKEXPORT Command
This example presents the pair information CSV file and EXCTG information CSV file that are
created by the YKEXPORT command given the copy group configuration shown in
,PCU,PCCA,SDEVN,SSN
,
,
,A101 ,
,
,
,A201 ,
,SSN
,CTID,SubCTID,FEXCTG,FSpDKC,FarbCDEV,REXCTG,RSpDKC,RarbCDEV
,02
,1
,04
,1
CSV Files Used by the Copy Group Definition File Generation Function 359
Figure 151 (page
,SCU,SCCA,CTID,SubCTID,Number-Of-Pairs
,
,
,01
,02
,
,
,03
,04
,S
,
,
,
,002F
,
359). Insert spaces
,1
,1
,
,
,
,
"Example of a