HP StorageWorks P9000 Reference Manual page 224

NOTE: Regardless of the prefix specified in the STEM parameter, the Host-Discovered Array
Index structure is created with the prefix HCC.HDA, and the route list structure is created with the
prefix HCC.ROUTELIST. The created REXX variable structures take effect within the script.
Parameters
STEM(stem-name- 1 ) ~ <REXX prefix of 64 or fewer characters>
Specify a prefix to be used for the REXX variable structure that stores information when a
configuration file is loaded.
PREFIX(prefix) ~ <PREFIX string of 25 or fewer characters>
Specify the prefix of the configuration file name.
GROUP(copy-group-id) ~ <GROUP string>
When you are loading a copy group, specify the string obtained by removing the prefix.GRP.
portion from the copy group definition file name.
Maximum length that can actually be specified = 44 - (5 + PREFIX-length)
DAD(dad-id) ~ <DAD string>
Specify the DAD ID (host DAD ID) specified in the current host DAD ID.
You must specify this parameter when you operate the copy group.
Maximum length that can actually be specified = 44 - (13 + PREFIX-length).
ROUTE(route-list-id) ~ <ROUTE string of 8 or fewer characters>
Specify the route list ID to be loaded.
This parameter should be specified in the following cases:
When using the TrueCopy consistency preservation function
When the Remote DKC Control Function is used.
PATH(path-set-id) ~ <dataset prefix of 40 or fewer characters>
When you are loading a path set, specify the string obtained by removing the
path-set-ID-specified-in-PREFIX-parameter.PATH. portion from the path set definition file name.
MSG(stem-name-2) ~ <REXX prefix of 64 or fewer characters>
Specify an optional prefix for the name of the message structure used to store the messages to be
generated by this command. You must also include a trailing period character.
The message structure is initialized when the CLI command with the same name as the MSG
parameter is called.
224 CLI Commands