If the journal group is normally registered in a storage system as EXCTG, the
information will be displayed as follows:
When the copy is being performed in the forward direction: active(1,1) -
N/A(N/A,1)
When the copy is being performed in the reverse direction: N/A(N/A,1) -
active(1,1)
NOTE:
For flag1 and flag3, information is obtained in the following situations:
For P-VOL
◦
When the CAJ copy pair status is PENDING or DUPLEX
◦
If none of these situations apply, N/A is displayed.
N/A is displayed in the Device Information (DEVN) field in the following cases:
When the YKQRYDEV command returns an error
◦
◦
When displaying information about a device of a remote storage system if the route list
has not been loaded or the target storage system is not included in the route list
Volume Query Information Panel (Executing YKQRYDEV)
When you specify q for the AC column of the Copy Group Pair Status panel, the YKQRYDEV
command is executed for the P-VOL and S-VOL, and the Volume Query Information panels to
display the device information is displayed for each copy type.
158 ISPF Panels