Control Unit Selection List Panel - HP StorageWorks P9000 Reference Manual

In the initial state, the entries are displayed in ascending order of EBCDIC codes, with S/N followed
by Device Address Domain in the priority order.

Control Unit Selection List Panel

If s is specified in the AC column in the Discover HP Storage System panel, the Control Unit Selection
List panel displays a list of all detected CUs.
The Control Unit Selection List panel is shown in
Figure 26 Control Unit Selection List Panel
Table 20 (page 40)
Table 20 Contents of the Control Unit Selection List Panel
Item
Device Address Domain
Description
Storage System S/N
Model
uCode
IFType
Software Keys
AC
CU
SSID
40 ISPF Panels
describes the items in the Control Unit Selection List panel.
Description
DAD ID to which the CU belongs
Description of the storage system to which the CU belongs
Serial number of the storage system to which the CU belongs
Model of the storage system to which the CU belongs
Microcode information for the storage system to which the CU belongs
Interface version of the storage system to which the CU belongs
CA Setting for use of the copy type by the storage system.
Y— Copy type can be used.
CAA
N— Copy type cannot be used.
BC
CAJ
Specify an action:
s— Displays the Command Control Address (CCA) Selection List panel used
to display a list of volumes in the CU.
Control unit number
SSID of the CU.
If the CU has multiple SSIDs, one of them is displayed.
Figure 26 (page 40).