Host-Discovered Array Index Structure - HP StorageWorks P9000 Reference Manual

14
Information can be acquired only when the EXCTG function is used during a
reverse operation.
15
For supervisor DKC, the value is null.
16
The value is null when information cannot be acquired.
17
Displayed in GMT.
18
The details for the journal status are shown in the following table:
Cause code
(hexadecimal)
00
10
1 1
20
22
40
44
19
The value will be invalid if a command is executed for a delta resync pair.
20
The value is always 0.
21
The following table shows the C/T delta values stored in the REXX variable.
Condition
Copy group container that is not EXCTG
EXCTG
Copy group contains one or more consistency
groups for which a C/T delta value cannot be
acquired (consistency cannot be preserved).
22
If consistency cannot be preserved for each consistency group, the value is null.
23
This value is invalid for a PPRC copy pair.
NOTE: Element names ending with 0 include the number of .n. elements of the node.

Host-discovered Array Index Structure

The Host-Discovered Array Index structure is created by using one of the following methods:
Executing the YKLOAD command to load copy groups, so that the disk configuration definition
file will be converted to the Host-Discovered Array Index structure.
Executing the YKSCAN command, so that the scanned information will be converted to the
Host-Discovered Array Index structure with a prefix specified in the Arrays parameter.
The YKSTORE command saves the Host-Discovered Array Index structure to the configuration file.
332 Data Objects
Details
Initial status
Start status
Restore journal was interrupted/stopped (Indicates the status when restore journal
is stopped due to a copy pair suspend or dissolve operation for the S-VOL, and a
transition is performed to the start status)
Interrupted status
Interrupted
Stopped status
Stopped
Value that is set
Maximum C/T delta value for the entire
consistency group
Minimum C/T delta value for the entire
consistency group
null