Set Required Fax Information - Lexmark X443 User Manual

11

Set required fax information

The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic device to send any message via a
telephone fax unless the message clearly contains the following information in a
margin at the top or bottom of each transmitted page, or on the first page of the
transmission:
the date and time it is sent
an identification of the business or other entity, or other individual
sending the message
the telephone number of the sending machine or business, other entity,
or individual
See "Emission Notices" on page 100 and "Telecommunications Notices" on
page 101 for more FCC information.
Two ways to set required fax information
There are two ways to set the required fax information required by the FCC.
MarkNet resident web server (recommended) -- If your printer is
attached to a TCP/IP network, type the IP address in the URL field of
your browser to access the MarkNet resident web server stored on the
print server and set the required fax information.
OptraImage control panel -- If your printer is not attached to a TCP/IP
network, the required fax information is set using the numeric keypad,
buttons, and menus on the OptraImage control panel. Use this method if
your printer is locally-attached, or if your printer is attached to a
network not running TCP/IP.
20
The FCC is the Federal
Communications
Commission.