Job 5: Enlarge Copies; Job 6: Document With Color - Lexmark X443 User Manual

Job 5: enlarge copies

Enlarge a black-and-white drawing so you can see it better and make
annotations.
1
Place your original in the scan unit.
2
Press Enlarge. Hold down the button to rapidly increase the scaling factor.
3
Release the button when 125% appears on the display.
4
Press Go/Send.

Job 6: document with color

Make copies of a one page letter-size document containing several small, color
photographs.
1
Place an original page which has a photograph on it in the scan unit.
2
Press Content until the photo light is on, and then press Go to print a copy.
3
Press Content until the mixed light comes on, and then press Go to print a
second copy.
4
Compare the two copies to the original, and then decide which setting
produces the best quality of the photograph. Reset Content to the best
choice ( or
photo mixed
5
Enter the number of copies you want using the numeric keypad.
6
Return the page with the photograph to the scan unit, and then press Go/
Send.
).
36
If the scaling factor goes
beyond 125%, use the Reduce
and Enlarge buttons to change
the scaling factor.
Experiment with the Reduce
and Enlarge buttons to get the
copy just the way you want it.
Photo mode is intended to be
used to copy actual
photographs or similar high
quality images.
Photos printed on a printer
should be copied using mixed
mode.