Fax Station Name Not Set Up; Fax Station Number Not Set Up; Insert The Hole Punch Box - Lexmark X790 Series User Manual

Fax Station Name not set up

The Fax Station Name has not been entered. Sending and receiving faxes is disabled until fax is configured properly.
Try one or more of the following:
•
Touch Continue to clear the message.
•
Complete the Analog Fax Setup. If the message appears again, contact your system support person.

Fax Station Number not set up

The Fax Station Number has not been entered. Sending and receiving faxes is disabled until fax is configured properly.
Try one or more of the following:
•
Touch Continue to clear the message.
•
Complete the Analog Fax Setup. If the message appears again, contact your system support person.
Install bin [x]
Try one or more of the following:
•
Install the specified bin:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Install the specified bin.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.
Install Tray [x]
Try one or more of the following:
•
Install the specified tray:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Install the specified tray.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.

Insert the hole punch box

Insert the hole punch box into the finisher, and then touch Continue to clear the message.
Troubleshooting
257