Chapter 1: Setup - Lexmark X443 User Manual

Prerequisites - - - - - - - - - - - - - - - - - - - - - - - - - 8
Set up and configure - - - - - - - - - - - - - - - - - - - - - 9
Install the MarkNet print server in the printer - - - - - - - - -9
Attach the control panel overlays - - - - - - - - - - - - - - - 10
Check control panel and scan unit switch settings - - - - - - 10
Choose a location for the control panel - - - - - - - - - - - - 11
Remove scan unit shipping retainer or carrier bracket - - - - 12
Install the ADF on your scan unit- - - - - - - - - - - - - - - 14
Attach all the cables- - - - - - - - - - - - - - - - - - - - - - 16
Attach all the power cords and power up - - - - - - - - - - 17
Print a network setup page - - - - - - - - - - - - - - - - - - 18
Set an IP address in the MarkNet print server - - - - - - - - 18
Set required fax information - - - - - - - - - - - - - - - - - 20
Configure scan to network functions - - - - - - - - - - - - - 23
Restrict OptraImage usage - - - - - - - - - - - - - - - - - - 28
Verify the setup - - - - - - - - - - - - - - - - - - - - - - - - 30
Solve setup problems - - - - - - - - - - - - - - - - - - - 31
7
Chapter 1:
Setup