Cleaning The Document Glass - Lexmark X443 User Manual

Cleaning the document glass

Glass
1
Wet a clean, lint-free cotton cloth or swab with some Isopropyl alcohol
(95%).
2
Open the ADF unit and document cover as shown. Wipe the glass of
flatbed and ADF area by moving the cloth or swab from side to side.
3
Close the ADF unit and document cover. Your scan unit is now ready for
use.
Moving the scan unit
If you need to transport the scanner, follow these instructions to refit the
shipping retainer:
1
Turn off the scanner.
2
Raise the document cover to see the flatbed glass as well as the reading
engine.
3
Turn on the scan unit. The reading engine moves a few inches forward and
stays there for a few seconds. Turn off the scanner during this pause.
83