Install The Adf On Your Scan Unit - Lexmark X443 User Manual

6

Install the ADF on your scan unit

OptraImage 212/222, 312/322, Color 1200, T612
1
Raise the document cover to about 45 degrees.
2
Place the ADF paper chute to about 45 degrees. Insert the ADF paper chute
to auto feeder holes on the document cover as shown.
3
Pull out the wire leg under the paper chute and snap it into place.
4
Pull out the paper chute extension to the length you want.
5
Hold the output paper rack to about 30 degrees.
6
Insert the three clasp-joints on the output paper rack into the ADF.
7
Release the paper rack gently. Make sure the rack is firmly attached to the
ADF.
8
Pull out the output paper rack extension to the length you want.
ADF paper chute
Output paper
rack extension
14
The ADF is the Automatic
Document Feeder.