OptraImage 715/725 and W810
Replacing the pad assembly
The life expectancy of the ADF pad assembly (P/N 12G1835) is approximately
100,000 scanned pages or one year. If you experience problems with papers
double-feeding through the ADF, the pad assembly may be worn out and need
to be replaced.
1
Open the ADF.
2
Slide the pad assembly to the left, and then pull it toward you. Remove the
pad assembly carefully to avoid damaging the hook spring.
3
Insert the new pad assembly, and then slide it to the right.
4
Close the ADF.
Pad assembly
92
To purchase replacement
parts, contact Lexmark or the
place where you purchased
OptraImage. For information
about contacting Lexmark, see
"Customer Support" on page
107.