Table of Contents
Advertisement
Figure 1-14. Fitting the paper over the pin feeds
the right side of the paper into the right holder, moving the
10. Fit
holder as needed to match the width of the paper.
Close the right cover, making sure the paper has no dips or wrin-
11.
kles and lock the right holder in place.
12. Line up the two pressure rollers on the paper bail with the paper
supports (together they provide an even pressure for paper feed-
ing). Push the paper bail against the paper and that's it ... the
paper is ready.
The FX-286 can also accommodate single-sheet paper. It can be
loaded manually as shown in Appendix B or by using the optional cut
sheet feeder. Appendix B also contains information on how to remove
and reinstall the tractor feed unit. The extra cover that comes pack-
aged with the FX-286 is for use with single-sheet paper or the optional
cut sheet feeder.
Loading single-sheet paper...
1-13
Advertisement
Table of Contents
