Selectype; Selectype Operation; Turning Selectype On - Epson FX-286 User Manual

The FX-286's SelecType feature can produce nine special typestyles
and skip-over-perforation. The typestyles are:
This is condensed mode
T h i s
T h i s is elite m o d e
T h i s i s e m p h a s i z e d m o d e
T h i s i s i t a l i c t y p e
T h i s i s d o u b l e - s t r i k e m o d e
This is under
T h i s s u p e r s c r i p t
T h i s i s s u b s c r i p t

SelecType Operation

Using SelecType is easy. You turn on SelecType and select a type-
style, then turn off SelecType and print.
For convenience, this chapter uses the yellow label names of
the buttons-OFF LINE, FORM FEED, and LINE FEED.

Turning SelecType on

1. Make sure that the printer is on and that the POWER, READY, and
ON LINE lights are all on.
2. Press both the OFF LINE and FORM FEED buttons at the same
time, as illustrated in Figure 3-1. Hold them down for at least a
second, then release them.
Chapter 3

SelecType

i s d o u b l e - w i d t h
line mode
Note
3-1