Table of Contents
Advertisement
If you need fewer than 255 columns of graphics,
columns you want and n2 is zero. As you can see in Table
ever, a single eight-inch line will hold as many as
quadruple-density. Specifying more than 255 is where the second
number slot (N2) fits in. The first number that you send
number of columns, but the second does not represent a number of
columns; it is multiplied by 256 and added to
the maximum number of dot positions you can reserve is:
CHR$(27)"*"CHR$(3)CHR$(192)CHR$(12);
which is
dot positions plus
192
3264 dot positions in one row.
Once you have chosen the number of columns you want to use,
you can have your program do the calculations for you with the fol-
lowing format:
CHR$(27)"L"CHR$(N MOD 256)CHR$(INT(N/256));
The variable N is the total number of columns you want to specify.
The MOD (modulus) function calculates the value for n1, and the INT
(integer) function calculates the value for n2. For programming lan-
guages other than BASIC, consult your manual for the proper form
for these functions.
This format can be used with any graphics density and with any
value of N up to the maximum number of columns per line for that
density.
Designing Your Own Graphics
This section takes you through the development of a graphics pro-
gram. The example is not especially complicated, but it does include
the same steps you would use for a more complex figure so that you
have the basis for designing graphics on your FX-286.
n1.
times
dot positions, for a total of
12
256
is the number of
n1
how-
6-1,
columns in
1920
indicates a
(n1)
The command for
6-11
Advertisement
Table of Contents
