Single-Sheet Paper Loading Or Feeding Problems - Epson LQ-680 User Manual

Single-sheet paper loading or feeding problems

The printer does not load single-sheet paper or does not feed
it properly.
Cause
Tractor feeding is selected.
The paper on the paper
guide is positioned too far to
the left or right for the paper
sensor to detect that it is
there.
Single-sheet paper is not
loaded properly.
The paper thickness lever is
not set correctly.
Your paper is creased, old,
too thin, or too thick.
The printer does not fully eject a single sheet.
Cause
Your paper is too long.
5-6
Troubleshooting
What to do
Select single-sheet feeding. For more
information, see "Selecting a Paper
Source" on page 2-2.
Move the paper a little to the left or
right.
See "Using Single Sheets" on page
2-20 for instructions on loading single-
sheet paper.
See "Adjusting the Paper Thickness
Lever" on page 2-6.
See the paper specifications in
Appendix C and use new, clean sheets
of paper.
What to do
Press the Load/Eject button to eject
the sheet. Make sure the page length
of your paper is within the range
specified for single-sheet paper in
Appendix C. Also check and adjust
the paper size setting in your
application or printer driver.