Table of Contents
Advertisement
ESC (space)
Format:
ASCII code:
Decimal :
Hexadecimal:
Comments:
Determines the amount of space added to the right of each charac-
ter, specified in dots (l/72 of an inch).
n = number of dots
n = 0 to 63 (MSB ignored).
NLQ only.
Epson only.
l
ESC $
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
This sequence specifies the position from which subsequent charac-
ters are to be printed. The dot position is specified by n1 and n2; n1
is the lower byte of the dot position, and n2 is the higher byte.
Specifying the dot position as 0 (specifying 0 for both n1 and n2)
results in printing at the left margin; however, the sequence is
ignored and the previous setting remains effective if the position
specified is beyond the right margin. A dot is l/60 inch.
n1 = 0 to 255
n2 = 0 to 3
NLQ only.
Epson only.
l
G-22
E S C ( s p a c e ) ( n )
27
32
1 B
( n )
20
ESC
$
(n1)
27
36
1 B
(n1)
24
Select Character Space
(n)
Select Absolute Dot Position
(n1)
(n2)
(n2)
(n2)
Advertisement
Table of Contents
