Table of Contents
Advertisement
The printable characters for the Standard and Alternate sets are
shown in Figure 5-1.
The different control codes used in the IBM Proprinter mode are
listed and explained in Appendix J. If you are not a programmer, all
you need to know is to select "IBM Proprinter" or "IBM Graphics
Printer" (if that is one of the options) when you install an applications
program.
The features demonstrated in this chapter are available in
both the Epson and the IBM Proprinter modes, except as
noted.
In Chapter 4 you saw the enlargements of the three FX-286 widths.
Now you'll learn how to produce them.
5-2
Figure 5-1. IBM character sets
Note
Advertisement
Table of Contents
