AUX1 menu / AUX2 menu
This menu is only available if the optional interface has been
installed.
Setting
Buffer Size
Buffer Size
Determines the amount of memory used for receiving and
printing data received through the optional interface. If set to
, more memory is allocated to receiving data. If set to
, more memory is allocated to printing data. The factory
default setting is
LJ4 menu
This menu allows you to make various parameter settings while
the printer is in LJ4 emulation mode.
Setting
Font Source
Font Number
*
Pitch
*
Height
Parameters
Normal, Maximum, Minimum
.
Parameters
Resident, DIMM, Download
From 0 upwards (maximum value =
65535)
0.44 to 99.99 cpi in steps of 0.01 cpi
4.00 to 999.75 pt in steps of 0.25 pt
Control Panel Function
2
2-25