Using The Ecp Mode In Windows 95 - Epson ColorPage EPL-C8000 User Manual

Using the ECP mode in Windows 95

To use the ECP mode with a Parallel (IEEE 1284 level I compliant) connector,
your computer must support the ECP mode.
Note:
The ECP mode is not available with Windows NT 4.0.
To use the ECP mode, follow these steps:
1. Make the ECP mode settings in the BIOS setting program that comes
with your computer (for details of the settings and how to use the
program, consult your computer's documentation).
2. Click the
Panel
.
3. Right-click the
4. Select the
5. Select the
Properties
6. Select the
7. Make the appropriate settings in the Resource settings dialog box. The
settings depend on your computer system. For details, consult your
computer's documentation.
OK
8. Click
Start
button, point to
System
icon, and click
Device Manager
ECP Printer Port
under Ports [COM & LPT], then click the
button.
Resources
tab.
to save the settings.
Settings
, and then click
Open
in the menu that appears.
tab.
Technical Specifications
Control
A
A-15