Epson ColorPage EPL-C8000 User Manual page 52

Before you start printing in the GL/2 mode
You may need to change the printer settings, depending on your
output needs. First, check the printer's settings to make sure they
match the data you are trying to print. Check the following items;
the information may be necessary later.
Paper size:
Driver (plotter selection): HP-GL/2 or HP-GL plotters
Pen cofiguration:
Plot origin:
Orientation:
If you need to configure the printer settings, first switch the
emulation and then change the settings using the printer driver,
or SelecType.
Caution:
c
Settings or data saved in the printer RAM (such as downloaded
fonts) may be erased when you change emulation mode.
2-30
Control Panel Function
Printer's paper size setting
Pen number, pen width
Center or Corner
GLlike, landscape only
LJ4GL2, landscape or portrait