Epson ColorPage EPL-C8000 User Manual page 114

If you continue to use the printer without replacing consumable
products and it reaches the end of its service life, the printer stops
printing and displays the following messeges on the control
display or in EPSON Status Monitor 2. When this happens, the
printer cannot resume printing until you replace the depleted
consumable products.
Control panel
message
*
XXXX Toner
Out
Replace
Photocondctr
Replace
Waste T Box
Replace Oil
Roll
* Letter(s) of Y, M, C, and/or K indicate what color toner should be
replaced. For exmaple, the message "Y Toner Low" means that you
need to replace yellow toner cartridge.
Note:
The message appears for only one consumable products of a time. After
replacing the consumable product, check the control panel display for
replacement messages about other consumables products.
7-4
Maintenance and Transportation
EPSON Status
Monitor 2
message
The X (and X)
toner has run out.
The life of the
photoconductor
unit has benn
reached.
The waste toner
collector is full.
The oin in the fuser
oil roll has run out.
Description
The toner cartridge is
empty.
The photoconductor unit
has reached the end of
its service life.
The waste toner collector
has become full.
There is no oil left in the
fuser oil roll.