Parallel B menu, Parallel C menu
Speed
Specifies the transfer speed by selecting the delay period from
the STROBE to the ACKNLG signal. For more information on
the parallel interface signal, see "Interface Specifications" in
Appendix A.
Bi-D
Enables or disables bidirectional communication.
Note:
This options is available only when the Parallel B Menu is selected.
Buffer Size
Determines the amout of memory to be used for receiving data
and printing data. If set to Maximum, more memory is
allocated for receiving data. If set to Minimum, more memory
is allocated for printing data. The factory default setting is
Normal.
Serial menu
Word Length
You can select an 8-bit or 7-bit word length. See your computer
manual and software documentation for the proper setting.
The factory setting is 8-bit.
Baud Rate
Use this option to set the data transfer rate (baud) for the serial
interface. The baud rate is measured in bits per second (bps).
See your computer manual and software documentation for
the proper setting.
6-16
SelecType