Weider Platinum XP800 User Manual page 11

15, Slide a Pad Tube (50) into the Leg (5), Slide two
Large Foam Pads (52) onto the Pad Tube,
Attach the other Pad Tube (50) to the Leg
Lever (56} in the same manner.
16, insert the rod on the Backrest Frame (32) into the
slot in the Seat Carriage (44), Hold the Backrest
Frame vertically over the Seat Carriage and
slide the rod into the slot, as shown in the
inset drawing.
17, Adjust the tension on the upper cable (not shown)
as described in UPPER CABLE ADJUSTMENT
on the following page,
15
16
52
56
/
50
32
44
\
52
18. Make sure that all parts have been properly tightened, The use of the remaining parts will be explained in
ADJUSTMENTS, beginning on page 13,
Before using the resistance system, turn on the consote and change the resistance setting as
described in CONSOLE OPERATION on page 16.
11